NASA Goddard Space Flight Center's carbon nanotube manufacturing technology wins Nano 50 Award

November 14, 2007
NASA Goddard Space Flight Center's carbon nanotube manufacturing technology wins Nano 50 Award
NASA Goddard’s manufacturing process for single-walled carbon nanotubes, such as this one, is less expensive, simpler and safer than other methods. Credit: Innovative Partnerships Program Office, NASA GSFC

NASA Goddard Space Flight Center in Greenbelt, Md. announced that its method for manufacturing high-quality carbon nanotubes (CNT) has been named a winner in the third annual Nanotech Briefs Nano 50 awards in the Technology category. This award will be celebrated at the Nano 50 awards dinner November 14 at the NASA Tech Briefs National Nano Engineering Conference (NNEC 2007) in Boston, Mass.

Judged by a panel of nanotechnology experts, the Nano 50 awards recognize the top 50 technologies, products, and innovators that have significantly impacted (or are expected to impact) the state of the art in nanotechnology. The winners of the Nano 50 awards are the "best of the best"—the innovative people and designs that will move nanotechnology to key mainstream markets.

"My deepest gratitude goes out to the panel of experts at Nanotech Briefs magazine, as well as Goddard’s Innovative Partnership Program (IPP) Office, for recognizing this technology and its future impact," expressed retired Goddard innovator, Jeannette Benavides, who is presenting her award-winning technology at NNEC 2007.

Until recently, CNT use has been limited due to the complex, dangerous, and expensive methods for their production. Benavides’s technology represents a simpler, safer, and much less expensive manufacturing method.

The key innovation in the process patented by NASA Goddard is its ability to produce bundles of CNTs without using a metal catalyst. Most single-walled CNT (SWCNT) manufacturing methods—chemical vapor deposition, laser ablation, microwave, and high-pressure carbon monoxide conversion—use a metal catalyst to encourage carbon to grow in nanotube form without capping. Because Goddard’s process does not use a metal catalyst, no metal particles need to be removed from the final product, yielding a significantly better product in terms of quality and purity at a dramatically lower cost.

Given their level of purity, the high-quality SWCNTs made using Benavides’s discovery are particularly well suited for medical applications, where metal particles cannot be present, as well as applications where high strength and electrical conductivity are desired, since high purity enhances these characteristics. Yet, they can be used in other applications as well. For example, SWCNTs made with this process could be integrated into a polymer to result in a fiberglass-type material that is as strong as steel but with one-sixth the weight.

The commercial impact of this discovery is clearly demonstrated by the market’s significant interest in the technology. Goddard has licensed the technology to Idaho Space Materials, Nanotailor, and E-City NanoTechnologies, all of which were founded specifically to manufacture SWCNTs using Goddard’s technology. Goddard also has licensed the technology to American GFM.

"I'm very excited to see that the IPP Office’s licensing out of my technology is making CNTs more readily available, particularly for academic and other research programs. The fact that they now have access to lower cost CNTs bodes well for the future of nanotechnology," said Benavides.

"Dr. Benavides not only worked hard to develop the technology, but she also was very involved in the technology transfer process," explained the IPP Office’s Darryl Mitchell, who has led the licensing efforts for NASA Goddard. "Her dedication has been essential to the success of the licensing agreements."

Source: Goddard Space Flight Center

Explore further: NASA ultra-black nano-coating to be applied to 3-D new solar coronagraph

Related Stories

NASA MidSTAR-1 successful technologies may be revolutionary

February 19, 2008

Two new technologies launched onboard a U.S. Naval Academy satellite called MidSTAR-1 have proven successful in their tests in space. One technology is a sensor that can check for harmful chemicals and the other is a special ...

Space-age materials, one atomic layer at a time

August 17, 2012

Space can be a dangerous place. Micrometeorites, solar particles, and space junk — everything from spent rocket stages to paint fragments — zip past satellites at up to 12.4 miles (20 kilometers) per second, posing ...

Recommended for you

Physicists develop new technique to fathom 'smart' materials

November 26, 2015

Physicists from the FOM Foundation and Leiden University have found a way to better understand the properties of manmade 'smart' materials. Their method reveals how stacked layers in such a material work together to bring ...

Mathematicians identify limits to heat flow at the nanoscale

November 24, 2015

How much heat can two bodies exchange without touching? For over a century, scientists have been able to answer this question for virtually any pair of objects in the macroscopic world, from the rate at which a campfire can ...

New sensor sends electronic signal when estrogen is detected

November 24, 2015

Estrogen is a tiny molecule, but it can have big effects on humans and other animals. Estrogen is one of the main hormones that regulates the female reproductive system - it can be monitored to track human fertility and is ...


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.