Renesas Technology and Matsushita Electric Industrial today announced the development of a technique that achieves stable operation with 45nm process generation bulk CMOS for SRAM (Static Random Access Memory) that can be embedded in SoC (system-on-a-chip) devices and microprocessors (MPUs).
Tests of experimental chip with 512-Kbit SRAMs employing this technique have confirmed stable operation over a wide temperature range (-40°C to 125°C) and a larger operating voltage range margin with respect to process variations. The experimental SRAM chip, produced using a 45nm CMOS process, incorporated two different memory cell designs, one with a cell area of both 0.327µm2 and another with a cell area of only 0.245µm2 --- the world's smallest level. The smaller memory cell was achieved with a reduced processing dimension margin.
Details of this technology advance will be presented in paper 18.3 of Session 18 at the 2007 International Solid State Circuits Conference (ISSCC 2007) now being held in San Francisco. The innovation is of considerable significance because SRAM is an essential on-chip function for SoCs and MPUs used in embedded control applications. Conflicting trends see those applications becoming more sophisticated, requiring more SRAM, even as semiconductor process shrinks are making it more difficult to produce the stable SRAM operation necessary for proper device functionality. The 45nm process generation SRAM enabled by the new fabrication technique will make it possible to implement high-performance chips at low cost because it uses bulk CMOS instead of Silicon-on-Insulator (SOI) material, the more expensive alternative.
Overcoming problems caused by inevitable variations in threshold voltage
As LSI fabrication processes become finer, the increasing miniaturization causes greater variations of transistor characteristics, especially threshold voltage (Vth), which can disrupt SRAM operation. Vth variation takes two forms. Global Vth variation occurs on a chip-by-chip or wafer-by-wafer basis due to minute disparities in transistor shape, such as gate length and gate width. Thus, it shows deviations in the same direction among chips. Global Vth variation previously has been the main challenge SRAM designers have had to overcome.
By contrast, local Vth variation is caused by fluctuation of the state of impurities in semiconductors, and arises even in adjacent transistors of the same shape. Therefore, it occurs randomly and without directivity. With the progress in transistor miniaturization, the problem of local Vth variation first manifested itself in the 90nm process generation. It is a major challenge that must be surmounted for embedded SRAM implemented in the 45nm process generation.
The semiconductor industry has been actively pursuing development of techniques for achieving stable SRAM operation. However, the problem of Vth variation as it affects the 45nm process has required further technical developments. The solution for a 6-transistor type SRAM memory cell that Renesas Technology and Matsushita have developed has two elements. One is a read-assist circuit that performs automatic adjustment linked to Vth variations. The other is a write-assist circuit that uses hierarchically structured power supply wiring.
The new read-assist circuit employs the resistance of passive elements in a compensation function that has a layout resembling that of the memory cell. Since memory cell variations and resistance value fluctuations are linked, the effects of Vth variations are reduced. The compensation function adjusts voltage automatically with respect to temperature and process variations. As a result, memory cell stability has been secured in read operations under a wide range of operating conditions, even if the symmetry of memory cell electrical characteristics degrades through increases in temperature and process variations.
The new write-assist circuit adds finer power supply lines (divided into eight) to the memory cell's column-unit power supply lines in a way that the isolation needed for the write operation is performed only where necessary. Also, it implements hierarchically structured power supply wiring. This reduces power supply line capacitance in critical areas, allowing the power supply line potential to be dropped to a low potential at high speed. Measurements on the experimental chip confirm that even under worst-case conditions (-40°C, minimum operating voltage, and worst-case process conditions), the new write-assist circuit provides a major improvement in SRAM write speed compared to an SRAM design in which it isn't used.
Source: Renesas Technology
Explore further: Research could lead to biodegradable computer chips